View larger

HK ArduPilot Mega V2.5 Flight Controller USB/GYRO/ACC/MAG/BARO

Reference: AC586

Condition: New product

2 Item Items

Warning: Last items in stock!

More info

HK ArduPilot Mega V2.5 Flight Controller USB/GYRO/ACC/MAG/BARO

WARNING- These are NOT Plug and Play MultiCopter Controller Boards -
NO EMAIL OR PHONE SUPPORT WILL BE GIVEN !!!!

We do however supply full written instructions to allow you to follow all the setting up procedure -
PLEASE FOLLOW THEM TO THE LETTER, or you will encounterconfigurationand setting up problems !

PLEASE READ CAREFULLY
These Boards are only suitable for flyers with previous experience or technically minded . . . ! !
You will be required to do a certain amount of setting up and configuration to enable these boards to function and operate correctly,
you may need to re-flash the board with other firmware than that supplied to allow it to work with your R/C gear or make otheradjustments for this board to operate correctly.

Should you not feel confident or have no experience of these types of boards, or can can ask someone who may help you locally, wesuggest you first do some on line research to establish if these boards arebeyondyourcapabilities- Again these board areNOTplug and play -
Please only purchase if you are happy with the above statement !

Fully assembled Multicopter Control Board for Enthusiastic Builders Controlling upto Six

The HK ArduPilot Mega 2.5 is a complete open source autopilot system featuring the best selling technology. This version is ready to use, with no assembly required. It allows the user to turn any fixed wing, rotary wing or multi-rotor vehicle (even boats and car) into a fully autonomous vehicle capable of performing programmed GPS missions with waypoints.

Features:
Arduino Compatible
Comes pre-soldered (with straight pins) and tested
Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
Onboard 4 MP Dataflash chip for automatic data logging
Digital compass powered by Honeywell's HMC5883L-TR chip, now included on the main board
One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000
Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
On board enhancing genuine Molex Micro-USB

We also supply the latest Software Package to enable you to change all the functions of this controller board.

also the mission planner and flight software as shown below, this software is so complete and comprehensive allowing everyaspectof flight to be setandbeing updated on a daily basis.

you'll never be without the latestfunctionalityas this is the most up to date system available today, for land, water and all types of aircraft, just check out the comparison chart of other controller boards below, you can not beat it on price or performance !

Features:
Arduino Compatible
pre-soldered and tested
3-axis gyro, accelerometer, magnetometer and high-performance barometer
Built in 4 MP Dataflash chip for automatic data logging
Honeywell HMC5883L-TRDigital compass
Invensense's 6 DoF Accelerometer/Gyro MPU-6000
Measurement Specialties MS5611-01BA03 Barometric pressure sensor.
Atmel ATMEGA2560 and ATMEGA32U-2 (processing and USB function).
Micro-USB
(you will need a USB to Micro USB lead toconnectto the board)
Please ask foravailabilityof lead if you in need of purchasingone
tt
*Note:A GPS module is not included. Sold separately Here.

Specs:
Dimensions:67x40x10mm
Weight:17g

Includes:
tHKPilot Mega 2.5
t3pin 2.54mm pitch connection leads x 5
This product is based on theAPM Projectfrom 3D Robotics.
We also have hard Cases Here (Recommended to screenon-boardBarometer)